Fresh Filtered Water on Tap

The history of water filter systems

The history of water filter system

Water is vital to every human being to maintain our bodily systems. We have been dependant on finding clean drinking water from the beginning of time. WFA have been at the forefront of water filter systems since 1999. We create high-quality, long-lasting, fully-certified water filter systems that perform.

Up until 17th Century AD, humans associated pure drinking water with taste. They had little knowledge of contaminants and their effect on our health.

Water filtration has evolved with time and knowledge. We now understand that dangerous microorganisms can live in water. A water filter system is essential to kill these nasties before human consumption.

This blog discusses water filtration discoveries and advances since 2000 BC.

Ancient times 2000 – 1500 BC

Ancient TimesEarly India and Ancient Greece – 2000 BC.

Early Sanskrit and Ancient Greek writings around 2000 BC are the earliest known recordings of water filtration. At this time, people thought heat or boiling were the best forms of water purification. They also used crude straining methods of sand and gravel filtration.

At this point in history, people thought that water taste indicated its purity. They were not yet aware that even water that tasted pure could contain chemical contaminants or dangerous microorganisms.

We now know that just because water tastes good, it’s not necessarily safe to drink.

Ancient Egypt - 1500 BCAncient Egypt – 1500 BC

In 1500 BC, the Egyptians first discovered the method of coagulation for water filtration. Coagulation involves placing a chemical called alum in water.

Alum separates particles from the water to form larger particles, so impurities are easy to remove by straining.

The tomb of Ramses II shows images of water filtration using coagulation.

 

Hippocrates – 500 BC

Hippocrates - 500 BC

Image source– www.snipnew.com

Hippocrates was a Greek philosopher, acknowledged as the father of modern medicine. He was one of the first scholars to discover the healing properties of water.

This was in conjunction with his theory of the ‘four humours’ of the body (blood, phlegm, yellow bile and black bile).

He considered ‘health’ to be a harmonious balance and interworking of the humours. He considered pure water essential for a healthy body.

Like the scholars before him, Hippocrates associated good tasting water with purity. He set about finding the best way to purify water for drinking as part of his four humours philosophy. He discovered a crude water filter systems in the form of a cloth bag. This simple device became known as a ‘Hippocratic sleeve’.

The cloth acted like a sieve to filter out impurities from the Greek aqueducts. He boiled the water and then poured it through the filtration cloth. This trapped the sediments that were causing the bad taste and smell…

…creating cleaner, better tasting drinking water.

Aqueducts and Archimedes’ screw 300-200 BC

Between 300-200 BC, the Roman Empire began building aqueducts to supply water to large communities. Shortly after, Archimedes invented his water screw.

Roman aqueducts

Roman aqueducts

The Romans who designed and built the first aqueducts were ahead of their time. The idea of an aqueduct was to use gravity alone to bring water from outside mountain sources into towns and cities, basically taking water from areas where water was plentiful, to supply a large population.

Water in the aqueducts fed into lead, ceramic or stone pipes. The water is filtered through sedimentation tanks to reduce any water-borne debris. During Roman times, aqueduct water supplied public baths, latrines, fountains, private households and farm lands.

These engineering marvels took 500 years to complete and covered a length of 400km. They were revolutionary for their time and are still the basis of our modern-day sewer systems.

The multiple arches of the Pont du Gard in Roman Gaul

Archimedes’ screw

Archimedes’ screw

Image source-Wikipedia

Greek engineer, Archimedes, lived between 287 and 212 BC. He invented a machine like a screw to move water from low to high ground. The screw was initially used to irrigate farmland by pumping water from ship bilges and mines.

The original Archimedes’ screw consisted of a screw inside a hollow pipe. It turned manually by windmill, manual labour or cattle labour. As the screw moved, the bottom scooped water from the low-lying source and pushed it up the tube until it poured out the top.

This device is still in use today in several northern European towns. This image shows an Archimedes’ screw in Huseby, south of Växjö, Sweden. More importantly, it serves as the basis for many modern industrial pumps.

The middle ages

The middle ages set back and then re-emergence in 1627 AD

After the fall of the Roman Empire around 450 AD, aqueducts were either deliberately vandalised or fell into disuse through lack of maintenance. This saw a halt to scientific progress in water filtration technology.

During the middle ages (500-1500 AD) little progress was made to provide clean drinking water to the population. Yet it was around this time that the premise of clean water not necessarily being safe water took hold. It took another 200 years before any action was taken to resolve the issue.
Desalination
It wasn’t until 1627 AD that the world saw further advancements in water filtration technology. Sir Francis Bacon was the first known scientist to discover desalination.

His experiments and studies brought him to the conclusion that if he percolated seawater through sand, then the salt would be removed.

His attempts to desalinate water were not successful, but they did pave the way for further research into this area.

Analysing water with microscopes

Analysing water with microscopesAntonie van Leeuwenhoek was a Dutch spectacle maker, obsessed with object magnification. He experimented with grinding lenses to make microscopes and view the microbial world.

In 1676, one of his at-home experiments involved used his microscopes to view tiny drops of water. This led him to the astounding discovery that tiny ‘beasties’ existed in water. This was a significant step in the treatment of water.

Leeuwenhoek’s discovery meant we no longer assessed drinking water using taste alone. Scientists now began to understand that removing harmful microorganisms created safe drinking water.

The first water filter systems – 1700s

1746 saw the development of the first patented water filter system. These filters used a combination of wool, sponge and charcoal to remove sediment and particles.

In the late 1700s, Robert Thom developed the first water treatment plant in Scotland. The plant used slow sand filtration to remove as much as 99% of the bacteria in water.

Thanks to this plant, the entire city of Paisley, Scotland, had access to safe drinking water via pipes for the first time. The decrease in waterborne diseases as a result of filtered water from this plant led to the Metropolis Water Act of 1852. This law required all water supplied to London be treated by slow sand filtration.

Thom’s revolutionary water filtration design would change the face of water treatment history.

1854 cholera outbreak
Source: www.thevintagenews.com

In 1854, a cholera epidemic erupted in Soho, central London. Prominent scientists at the time incorrectly assumed the outbreak was due to ‘bad air’ or ‘filthy conditions’. Slow sand filtration was already in place, thanks to the new Metropolis Water Act.

British scientist John Snow was the only scientist able to pinpoint the cause of this outbreak. Thanks to the initial work of Antonie van Leeuwenhoek, he identified tiny cholera bacteria in the water through a microscope. He successfully treated the cholera with chlorine.

Water pump

Source: www.howstuffworks.com

Snow determined that the cause of the outbreak was an individual water pump in Soho. A nearby sewer contaminated the pump, leading to cholera infection. Ironically, residents at the time noted the water from this pump had overall good taste and quality. This again reinforced that taste and visual clarity do not indicate pure water for drinking.

Snow’s cholera discovery was a pivotal turning point in the history of water filtration. It forced the UK government to introduce chlorine, along with slow sand filtration, as the standard for water filtration. This soon spread to other developed countries in Europe and America.

The first carbon filters – 1800s

The first carbon filters - 1800s

It’s thought that as far back as 1827, John Doulton and his son Henry, (of English fine china and pottery fame) invented the ceramic water filter system to remove bacteria from drinking water. In London at that time, drinking water from the Thames was contaminated with raw sewage, so epidemics of cholera and typhoid were common.

Next came the Doulton Manganous Carbon Filter in 1862, which tied in with the French chemist, Louis Pasteur’s research into bacteria and his advancements in microbiology. This was one of the first carbon cartridge type filters.

Led by Henry Doulton, Doulton’s Research and Development department created micro porous ceramic (diatomaceous earth) cartridges which could remove bacteria with 99% efficiency.
From this point on, Doulton filters were used by the military, Crown Agents and hospitals and were gradually introduced into the home. Henry

Doulton was knighted by King Edward VII and given the honour of using the Royal Crest for his products in recognition of his work with drinking water filtration.

The range and efficiency of this water filter system has changed over the years but the popularity and effectiveness of the early 20th century invention continues with these water filter systems are still widely used across the world today.

Chlorination – 20th century advancements

By the early 1900s, the UK introduced chlorination for mass water purification.

Chlorination, in conjunction with sand water filter systems, resulted in the virtual elimination of diseases such as cholera, typhoid and dysentery.

Chlorine was so effective at eliminating these diseases that Life magazine called it: “probably the most significant public health advance of the millennium.”

The US also introduced chlorination treatment of water to major cities during the early 20th Century. The 14th January,1916, was a turning point in water treatment history in the US.

On this day, the chlorination equipment in Milwaukee Wisconsin stopped working for seven hours. During this time, the untreated water that pumped from Lake Michigan to local residents caused mass illness and death. There were from 25,000 to 100,000 cases of diarrhoea, 500 cases of typhoid fever and 60 deaths. From this point on, the case for chlorinated water treatment became clear.

Modern water treatment in Australia

Modern water treatment in Australia

Here in Australia, we take it for granted that drinking water from a tap or bubbler is safe. According to Water Research Australia, before water is distributed to urban communities it is treated to ensure it is safe to drink.

According to the Australian Drinking Water Guidelines: “Ideally, drinking water should be clear, colourless, and well aerated, with no unpalatable taste or odour, and it should contain no suspended matter, harmful chemical substances, or pathogenic microorganisms.”

This treatment removes sediments and kills harmful microorganisms. The process usually involves coagulation, sand filtration, disinfection with chlorine and sometimes removal of contaminants using activated carbon.

Today’s home water filtration

Today’s home water filtration

By the time water comes out of your tap, chlorine and other chemicals have already disinfected your water, killing bacteria and viruses, but they often leave it with an unpleasant taste and smell.

Chlorine makes our water safe… but we don’t need to drink it!

Since the 1990s, we have seen a rise in the development and use of water treatments for the home. People often prefer the taste and smell of filtered tap water. Today’s water filter systems not only remove bad taste and odour, but also contaminants such as giardia, cryptosporidium and chlorine.

WFA water filter systems

At WFA we understand that it’s not only important to filter out the bad stuff… it’s also vital that we leave in the good stuff. Because water not only hydrates us, it also delivers fluoride for our dental health, as well as essential minerals and salts.

A WFA water filter system uses the pores within carbon to remove the nasty tastes and odours which are caused by a variety of factors. These include chlorine and other chemicals, ageing underground pipes and fluctuating dam levels.

Our filtration method ensures your water tastes, looks and smells as good as it can. It also removes limescale to protect your appliances.

Using our filter cartridges ensures your family and pets are safe from the impurities you can’t see. They filter nasties as small as one micron, which is 1/75th the width of a human hair!


Looking for a water filter system? Our high quality, independently WaterMark approved water filter systems are easy for you to install, use and change. With nearly 20 years in the water filter systems business, WFA is proudly Australian with a wealth of knowledge ready to share with you.

Learn more.

Water Filters are Space Savers

Don’t let your water filter take up precious bench space

There are several types of water filter systems on the market. These include water filter jugs, fridge filtration systems and bench top filters. If you are looking to minimise clutter in your kitchen, your best bet is an undersink filtration system.

You may have a stone benchtop with undermount sink. If water filtration is an afterthought to your kitchen design, chances are you won’t want to be drilling a hole in it for a dedicated water filter tap!

In that case, an inline water filter system with your own choice of tap design may be better.

Fresh filtered water in your new kitchen is a must – if you want it to taste, look and smell better. But choosing the correct water filter system for your family depends on a number of things…

How to decide which filtration system is best for your family

Filtration System is Best for your Family

If you’re considering investing in a water filtration system…you’ll want to make sure that you choose the best water filter for your needs.

To help with the process, we’ve come up with five key questions to ask yourself…

  1. How much money do I want to spend?
  2. How much bench space do I have?
  3. How much water pressure do I require? For example, do I need a fast flow rate because I’m using filtered water for other things, like washing vegetables?
  4. What am I going to do with filtered water? Am I going to just drink it or use it for hot drinks and cooking?
  5. The size of my family – How many people are going to use it?

If you require fast flowing water for all your family’s kitchen needs and want to minimise bench clutter, then an undersink option is best. With our Inline System, there’s no need for a dedicated tap. You just use your existing tap and the system fits neatly under your bench top.

How to Install the WFA Inline system to save space

Install the WFA Inline System to Save SpaceYou can install our Inline Water Filter under your sink both horizontally and vertically to maximise your cupboard space.

For a step by step guide to installing your new inline system, check out this video.

Want to buy a new water filter system? Browse our online store today.